Engineered Diesel T4/T4 adapter, 50mm external gate, 2" SS external exhaust pipe

GOT-Torque

GOT-Torque

is
Joined
Jul 2, 2007
Messages
5,284
You get the T4/T4 adapter with the thicker pipe running to the flange (all tig welded together), the 50mm external gate, and a 2" SS exhaust pipe that runs down and back to discharge the exhaust out under the truck (tig welded as well). All vbands necessary for installation as well as the bag of springs for the gate. Ran for one season.

$650 for everything, ready to install. Works as advertised, just don't need it anymore.

FYI, new adapters from ED come in pieces and must be welded together.

I'll try to get some pics up tonight.
 
IMAG0077.jpg


IMAG0078.jpg
 
Ok im a dummy with external wastegates..how do you change the psi as to when they open
 
yoshi470 said:
Ok im a dummy with external wastegates..how do you change the psi as to when they open
Click to expand...

That is what the bag of springs is for. You could probably use a regulator to control the pressure one or both sides of the gate.
 
Combination of springs, and pressures to the top and bottom side of the pistons.
 
$575 and I will throw in an adjustable regulator that can be used for dialing in how your gate actuates.
 
You must log in or register to reply here.
Back
Top