External screw - p-7100

[baprewitt]

ok, not real familiar with the ppump. but just got a setup for my 24v and a local prostock tractor guy told me to just go ahead and put an "external screw" on it to make adjustments alot easier.

does this mean an ag type gov or what
any pictures or helpful information is greatly appreciated!!!!!!!!!:ft:

 

[92fordcummins]

http://www.scheiddiesel.com/display_part/2504.php This is the only thing that I can think of.

 

[Ragged Edge]

It would require a ag gov all they do is put fuel adjustment screw on the out side of the cover

 

[baprewitt]

is the one scheid offers what i need (click link by 92fordcummins). this seems to be what i had imagined

 

[Ragged Edge]

if u where talkn 2 a tractor puller he was proably talkn about what i said

 

[97' CTD]

If u plan to run a RQV gov. (Automotive) then that is the plate u want....(Listed Above)
Brandon

 

[crabbelle]

so is this just a bolt on part or will a new afc housing be needed?

 

[JerrodGlover]

It will bolt on where the AFC and Fuel plate go.

 

[9 LIVES]

That one is nice but you have to take the mack cap off everytime you want to adjust it. There is one that Scheid has that is like a big red cap that I think works like a large screw to adjust fuel on the go.

 

[CR785]

That one is nice but you have to take the mack cap off everytime you want to adjust it. There is one that Scheid has that is like a big red cap that I think works like a large screw to adjust fuel on the go.

The big red cap is where the oil is filled for the pump. I have a schied built 13mm pump with the rsv govenor. It is pretty much an ag housing with fuel and rpm adjustment screws on the back so you dont have to go inside the pump. The kit shown above would be goo if youj are running a auto tpe housing and no afc.