F-350 Superduty Pulling Chassis

PTPULLINCHASSIS

PTPULLINCHASSIS

DEALS ON REAL WHEELS
Joined
Oct 1, 2008
Messages
709
THIS TRUCK IS SET UP FOR PRO STREET TYPE CLASSES AND WOULD WORK WITH GAS OR DIESEL POWER PLANTS. THE CHASSIS SET UP HOOKS VERY HARD AND MAKES SMOOTH PASSES DOWN THE TRACK EVERYTIME OUT. HERE IS THE LIST OF GOODIES!

TIRES & RIMS
SOLD

DRIVE TRAIN

DANA 60 FRONT W/ DETROIT LOCKER, 1 1/2" 35 SPLINE CHROMOLY INNER & OUTTER AXLES SHAFTS, FORGED AXLE JOINTS AND SOLID DRIVE FLANGES.

DANA 80 REAR W/ OPEN CARRIER THAT HAS BEEN TIG WELDED AND HEAT TREATED.

INTERIOR

INTERIOR IS COMPLETE FOR THE MOST PART W/ SEVERAL EXTRAS LIKE STEWART WARNER GAUGES THAT ARE MOUNTED IN THE PILLAR POD AND ALSO A STEWART WARNER 10000RPM MONSTER TACK. THE TRUCK IS WIRED WITH A PAINLESS WIRING PANEL AND SWITCHES. IT ALSO HAS 2 REAL NICE AFTERMARKET RACING SEATS THAT CAN ADJUST FORWARD-BACKWARDS AND RECLINE.

FUEL SYSTEM
THE PUMP AND REGULATOR ARE BOTH AEROMOTIVE. FUEL LINES ARE STAINLESS BRAIDED W/EARL'S FITTINGS AND A 10 GALLON FUEL CELL IN THE BED.

MISC. CUSTOM COMPONENTS

CUSTOM FRONT WEIGHT BOX W/ ROLLER ON BOTTOM AND IT ALSO HINGES SO LOADING THE TRUCK FULL OF WEIGHTS IS SIMPLE.

ELECTRIC OVER HYDRAULIC STEERING SYSTEM(IT STILL UTILIZES THE FACTORY TILT STEERING WHEEL)

TOTALLY ADJUSTABLE PULLING HITCH

CNC HYD. BRAKE PEDAL & MOUNTS W/MASTER CYL.

CNC HYD. CLUTCH PEDAL & MOUNTS W/ MASTER CYL. AND SLAVE CYL. SYSTEM.

$8000

740-819-6200

BIGRED2.jpg
 
house said:
what motor was in it?
Click to expand...


IT HAD A BBF 585" GASSER BUT W/MINOR CHANGES CAN MAKE ANYTHING WORK. I WAS GOING TO DROP A 5.9 CUMMINS IN IT FOR OUR 3.0 PRO STREET CLASS BUT I CAME ACROSS A REAL NICE 58 DODGE I'M GOING TO USE FOR THAT PROJECT.
 
Seen this truck pull several times and it pulled and ran VERY strong! Whoever gets this truck will not be disappointed! Bump for a sweet truck
 
PTPULLINCHASSIS said:
THIS TRUCK IS SET UP FOR PRO STREET TYPE CLASSES AND WOULD WORK WITH GAS OR DIESEL POWER PLANTS. THE CHASSIS SET UP HOOKS VERY HARD AND MAKES SMOOTH PASSES DOWN THE TRACK EVERYTIME OUT. HERE IS THE LIST OF GOODIES!

TIRES & RIMS
SOLD

DRIVE TRAIN

DANA 60 FRONT W/ DETROIT LOCKER, 1 1/2" 35 SPLINE CHROMOLY INNER & OUTTER AXLES SHAFTS, FORGED AXLE JOINTS AND SOLID DRIVE FLANGES.

DANA 80 REAR W/ OPEN CARRIER THAT HAS BEEN TIG WELDED AND HEAT TREATED.

INTERIOR

INTERIOR IS COMPLETE FOR THE MOST PART W/ SEVERAL EXTRAS LIKE STEWART WARNER GAUGES THAT ARE MOUNTED IN THE PILLAR POD AND ALSO A STEWART WARNER 10000RPM MONSTER TACK. THE TRUCK IS WIRED WITH A PAINLESS WIRING PANEL AND SWITCHES. IT ALSO HAS 2 REAL NICE AFTERMARKET RACING SEATS THAT CAN ADJUST FORWARD-BACKWARDS AND RECLINE.

FUEL SYSTEM
THE PUMP AND REGULATOR ARE BOTH AEROMOTIVE. FUEL LINES ARE STAINLESS BRAIDED W/EARL'S FITTINGS AND A 10 GALLON FUEL CELL IN THE BED.

MISC. CUSTOM COMPONENTS

CUSTOM FRONT WEIGHT BOX W/ ROLLER ON BOTTOM AND IT ALSO HINGES SO LOADING THE TRUCK FULL OF WEIGHTS IS SIMPLE.

ELECTRIC OVER HYDRAULIC STEERING SYSTEM(IT STILL UTILIZES THE FACTORY TILT STEERING WHEEL)

TOTALLY ADJUSTABLE PULLING HITCH

CNC HYD. BRAKE PEDAL & MOUNTS W/MASTER CYL.

CNC HYD. CLUTCH PEDAL & MOUNTS W/ MASTER CYL. AND SLAVE CYL. SYSTEM.

$8000

740-819-6200

BIGRED2.jpg
Click to expand...



I HAVE USED THE HYD. CLUTCH SET UP, FUEL SYSTEM AND WIRING ON MY NEW TRUCK BUT I STILL HAVE THE REST OF THIS CHASSIS IF ANYONE IS INTERESTED FOR $5500

THANKS JASON 740-819-6200
 
You must log in or register to reply here.
Top