Dusty's Diesel
New member
- Joined
- Jul 10, 2008
- Messages
- 303
This is off my truck everything worked great when it was pulled. The gears on the pump have been teflon coated by Fass to prevent falure. I went through several of these than they did that for me and never had another problem. The ITP RR is complete other than the piece that mounts on the side of the filter housing. I eliminated my filter and just put a tee there to the heads. I also ran braided hose from were the Fass lines stoped up to the motor to up the volume. This setup would hold 62 psi under Wot w/ any of the injectors that was in my truck. 225's and 190's. Buyer will have to pay shipping. Thanks Dusty
