Fass 150 how much HP can it support for common rail

[Duramaxallison0]

How much HP can a fass 150 support? Right now Im around the 850ish mark and it really doesn't seem to be keeping up with the fueling needs. Im running twin cp3s with 250s stix so pretty aggressive fueling. Just tryin to see if its time for a 200

 

[JohhnyFoxtrot]

Put a guage on it and see where your at. I have about the same fueling requirements as you and my little GDP 392 holds 20psi to the pumps at all times.

 

[dwitt0187]

Im at 821hp on a 03 common rail with a raptor 100

Danny

 

[SPEEDSHIFT]

Plenty of guys over 900hp on fuel with a 150.

 

[jordanjames81]

like Doug said put a gauge on it at idle mine at 21 psi WOT its holds 19 psi. A 150 should be fine for your fueling.

 

[inline6power]

Eric Browns truck did 1132 on fuel with that pump.

 

[desertchecker]

Eric Browns truck did 1132 on fuel with that pump.

eric had told me he had (2) 150 pumps hooked up when his truck hit 1132....

 

[2Tone12V]

Eric Browns truck did 1132 on fuel with that pump.

Think he had an AirDog on it until 900ish. Then had to add a Raptor as well for the 1132 if I recall our conversation back then. Ran them in Parallel I do believe.

 

[desertchecker]

Think he had an AirDog on it until 900ish. Then had to add a Raptor as well for the 1132 if I recall our conversation back then. Ran them in Parallel I do believe.

yes I believe thats what he had told me ......... your right!

 

[morkable]

I have a 150 150 and it was great till about 1200 ish

 

[Duramaxallison0]

I got the gauge just waiting for time to install. been so damn busy working lately. Maybe just new filters? they are only 3k old.

 

[fordassassin]

I think Eric has 2 lift pumps when I asked him.