I bought one from a guy the other day but it didnt have the fitting to go into the pump. Anyone know what size it is? I just didnt want to take out my banjo bolt as it is my daily driver. Or where is the best place to find something like that fitting.
Fass ??
- Thread starter Dezlsmkr
- Start date
jktcummins
24v GOD!!!! HAHAHA
- Joined
- Apr 1, 2007
- Messages
- 2,450
Just call Diesel Performance Products and tell them what u need. Talk to Dan and they can get you hooked up with what you need.
If I remember right it was a 10mm x 1.5 thread on the banjo side and a 3/8 flare/6an to the fass. But you can get them almost anywhere that is a FASS dealer. I did have a banjo tapped and fitted with a 3/8 fitting so that I could run the mechanical and the fass for a while and that seemed to work pretty well.
Twisted Shifter
New member
- Joined
- Jun 28, 2006
- Messages
- 2,323
10mm x 1.5 is correct.
Diesel-Dan
Just another Texas Boy...
- Joined
- May 9, 2006
- Messages
- 536
Its actually a M12x1.5 that screws into the VP or CP3
M14x1.5 is for the P-pump
Our in-house part numbers are:
(Dodge Injection Pump Fitting)
DIPF-1001 (VP-44 and CP3)
DIPF-1002 (P-7100)
Any FASS dealer can get these items dropped shipped to you directly.
M14x1.5 is for the P-pump
Our in-house part numbers are:
(Dodge Injection Pump Fitting)
DIPF-1001 (VP-44 and CP3)
DIPF-1002 (P-7100)
Any FASS dealer can get these items dropped shipped to you directly.