Feeler on some VP and CR parts

Pinion Twister

Pinion Twister

Unsure
Joined
Jul 7, 2008
Messages
154
anyone interested in the following 2nd Gen stuff?

$450: 24v head has been fire-ringed, decked, and valves ground by JR Adkins approx. 25k miles ago. Needs Ex. seals. Can only find 2 of the small heat cracks which are pretty common.

$425: F1 helix 2 cam Bolt on gear option low miles no wear. Does have fuel pump lobe.

$800: B1-2 62/65/14 Built by Ken @ Turbo Auto Diesel Great shape with normal side to side and no in and out play.

$425: Good VP44 Taken off for a p-pump swap. Has been ran with fass pump and MM oil in fuel.

$375: Edge "drag" comp Works fine

$425: Quad adrinaline Works great and even better when stacked with smarty. Can spin over 4k with that stack. Does not have pulse monitor.

$500: Smarty Works fine, Never been reprogramed. Comes with case, cable and paper work just like new.
Possable trades On the 2nd Gen. stuff for a built P-Pump 550cc

For 03' TO 05' CR

$450: TST powermax CR remote does not have gauges. Works great just switched to smarty

Thanks, Keith
 
what year head? exhaust seals? (on top of valve guide)
 
Head is a 99', no valve seats if that is why you are asking.
Yes valve seals. A couple of the ex. (green) are spilt.
Thanks, Keith
 
still got the cam? How many miles? Will it work in my 24v with no mods?
 
You must log in or register to reply here.
Back
Top