94 12valve
Kingpin
- Joined
- Nov 3, 2007
- Messages
- 2,002
well I hit the dyno today and was happy with the numbers. I made 570hp and 1077ft/lbs:woohoo:.
about the truck
94 cummins
175 pump, no plate, afc tuned, rack plug, .093 holders, industrial dv's (got them from weston), 4k's, timed at 22.5*
dragon flow injectors
air dogg 150
ported head, 60lbs springs, o ringed, with arp studs
big stick cam
turbo s465
here is the video
YouTube - Dave Swank
It looks to me like I dont have enough fuel? I'm thinkin bout bumping the timing and adding a set of full cuts any thoughts on this? I'm trying to build a good running 2.6 puller, the truck does not see the street much at all.
on the dyno sheet the torque number was screwed up due to a second mark on the damper :bang ... I mean it really did make 2500 ft/lbs :hehe:
about the truck
94 cummins
175 pump, no plate, afc tuned, rack plug, .093 holders, industrial dv's (got them from weston), 4k's, timed at 22.5*
dragon flow injectors
air dogg 150
ported head, 60lbs springs, o ringed, with arp studs
big stick cam
turbo s465
here is the video
YouTube - Dave Swank
It looks to me like I dont have enough fuel? I'm thinkin bout bumping the timing and adding a set of full cuts any thoughts on this? I'm trying to build a good running 2.6 puller, the truck does not see the street much at all.
on the dyno sheet the torque number was screwed up due to a second mark on the damper :bang ... I mean it really did make 2500 ft/lbs :hehe:
