I have for sale a Forced Inductions 2.6 Protrusion Legal Turbo. It currently has a standard cover with a machined bore/inlet (instead of plain cast inlet),non-gated t-4 1.0 housing, extended tip cast wheel, and is in like new condition. Turbo was only driven home from the shop and has 2 test hooks before i decided to get out of pulling. It has no wear at all and is as new as one could get without still being in the box. I looked at the measurements with a calipers and this is what i had come up with: Compressor wheel is 65/93 and the turbine wheel is 83/74. I have a machinist within minutes of me that makes an inlet velocity stack that is attached on the front to make this into a race cover (with or without surge holes). It can be permanently welded on along with welding the map groove shut then machined or installed with allen screws and map groove left alone to be interchangeable. I also have a black turbo blanket for this turbo as well. Turbo alone $1100, add $190 for the race cover option, add $75 for the turbo blanket. It is off the truck and ready to ship asap. If interested, call 608-606-0900. I also have an Extreme Prejudice Racing full install kit for 01-04 Duramax available as well. (Includes turbo, oil lines, coolant crossover, 5" metal powedercoated intake with big AFE cone filter, down pipe, RDL Pedistal, Mandifilds, Up Pipes and up pipe blankets).
Last edited: