FP Sensor

[CumminNotRunnin]

Hey guys just put a FASS on my truck and dont know where the new sensor goes? does anyone know where i can get a adapter to put my fp sensor in the line somewhere.... please explain where and how i would do this.... THANKS :rockwoot:

 

[Rob_Bones]

you can get a sleave from the hard ware store and drill and tap a 1/8th inch NPT hole in to it and put you sensor in it. Mount the sleave were the lift pump used to be. You can rig a lot of different things, just do it cleanly. There isn't a big right or wrong way to do it. If you have access to a drill press, take a chunk of aluminum (2X2X4inch) and drill all the way through it, tag threads about a inch in on each side and put the 1/8th inch hole on the top. Then take some angle stock and make a braket that will bolt in where the lift pump was at. Hope this helps some.