Chevyguy15
New member
- Joined
- Feb 6, 2015
- Messages
- 226
Wagler competition products
6.7 Cummins deckplate kit
1” deck plate
1” longer billet rods
1” longer ARP 14mm head studs
1” longer 7/16 push rods
Darton 4.2 bore sleeves
Darton 4.1 bore sleeves
Factory 6.7 block
Carrillo 4.215 forged pistons
All new in boxes $7350
Fire ringed head
Thread in plugs
MHP oversize seats
MHP 2mm oversize valves
Maxspool dual valve springs with titanium retainers
Joker fab modded side draft
At machine shop getting finished and more ported. $4000
S475/591 compounds $3500
Fleece dual fueler kit with fish controller $900 upgraded line pump to pump line. NO cp3 included 1508 miles
6.7 Cummins block
All cam bearings, decked, bored .005 over, line honed with gorilla girdle. $2500 with girdle fresh
Fresh still at machine shop for new bushings. R&R billet std length 6.7/5.9 rods with ARP 625 bolts $2100
Balanced, polished std/std journal 6.7 crank $1200
Fluid dampener and fleece tool $375
HD push rods from maxspool $250 brand new
Carrillo .005 over pistons for above block $1700 brand new
Oldskool fab carbon valve cover, lines, catch can $900
Oldskoolfab carbon diff covers $750 pair
Yukon grizzly lockers and 4340 axles $1200 am 11.5 rear
Goerend phat shaft input, output, billet drums you name it. 2000+ hp built, adapter plate, 5.9 starter, goerend 17-250 stall, CCSB built driveshafts $10,000 whole 48re swap for 68rfe truck more included not mentioned over 15k to copy
Hoosiers dr2 on renegade 18x10 wheels $1700 4 passes
Bullseye street race cover s483/96/1.25 t4 $1300
Bullseye tct gen 3 race cover 483/96/1.32 t6 $1800 new is $3000
Hamilton steel tappets 2000 miles on them $200
Brand new maxspool 207/220 billet cam $500
Modded 6.7 rail, lines, 36k relief and 6.7 sensor $500
Mishimoto 3rd gen intercooler with v bands welded one $800 with v bands. V bands are 130 each new
Mishimoto 3rd gen rad. $450
6.7 rockers, box,
Fleece 6.7/5.9 jumper harness $500
Hell bent control arms 500
Hellmann driveshaft hoops 375
D&j billet cover $250
Aam Motorsports pulley kit for fleece kit $150
Hardway 6.7 billet engine mounts $525
6.7 Cummins deckplate kit
1” deck plate
1” longer billet rods
1” longer ARP 14mm head studs
1” longer 7/16 push rods
Darton 4.2 bore sleeves
Darton 4.1 bore sleeves
Factory 6.7 block
Carrillo 4.215 forged pistons
All new in boxes $7350
Fire ringed head
Thread in plugs
MHP oversize seats
MHP 2mm oversize valves
Maxspool dual valve springs with titanium retainers
Joker fab modded side draft
At machine shop getting finished and more ported. $4000
S475/591 compounds $3500
Fleece dual fueler kit with fish controller $900 upgraded line pump to pump line. NO cp3 included 1508 miles
6.7 Cummins block
All cam bearings, decked, bored .005 over, line honed with gorilla girdle. $2500 with girdle fresh
Fresh still at machine shop for new bushings. R&R billet std length 6.7/5.9 rods with ARP 625 bolts $2100
Balanced, polished std/std journal 6.7 crank $1200
Fluid dampener and fleece tool $375
HD push rods from maxspool $250 brand new
Carrillo .005 over pistons for above block $1700 brand new
Oldskool fab carbon valve cover, lines, catch can $900
Oldskoolfab carbon diff covers $750 pair
Yukon grizzly lockers and 4340 axles $1200 am 11.5 rear
Goerend phat shaft input, output, billet drums you name it. 2000+ hp built, adapter plate, 5.9 starter, goerend 17-250 stall, CCSB built driveshafts $10,000 whole 48re swap for 68rfe truck more included not mentioned over 15k to copy
Hoosiers dr2 on renegade 18x10 wheels $1700 4 passes
Bullseye street race cover s483/96/1.25 t4 $1300
Bullseye tct gen 3 race cover 483/96/1.32 t6 $1800 new is $3000
Hamilton steel tappets 2000 miles on them $200
Brand new maxspool 207/220 billet cam $500
Modded 6.7 rail, lines, 36k relief and 6.7 sensor $500
Mishimoto 3rd gen intercooler with v bands welded one $800 with v bands. V bands are 130 each new
Mishimoto 3rd gen rad. $450
6.7 rockers, box,
Fleece 6.7/5.9 jumper harness $500
Hell bent control arms 500
Hellmann driveshaft hoops 375
D&j billet cover $250
Aam Motorsports pulley kit for fleece kit $150
Hardway 6.7 billet engine mounts $525
