DIESEL_POWER
NGM Diesel
- Joined
- Jul 8, 2006
- Messages
- 5,178
Im selling a brand new 06 CR cummins Race engine for a customer that has lost interest in racing. It's 95% complete, all it needs to finish is install rockers,VC,intake manifold and fuel lines, injection pump. All parts are included except injection pump. Parts included all listed below. Around 30K invested and he will let go for $17500. OBO
ZZ fab Aluminum oil pan with kick out
HD ARP Main studs
Internal balanced Crank, and matched "0" ballance rotating assy
Coated main Bearings
Aline bored and honed
Coated Thrust bearings
R&R H beam Steel billet Connecting rods.
Tool steel Light weight Wrist pins
Ross Aluminum pistons With special Bowl design and .150 valve reliefs Coated, with spirolocs
3 ring stack 1/16, 1.16, 3/16 Hellfire, Iron,stainless
Coated lifters and Hamilton "Big stick" camshaft
HS 1.5 over stock ratio Aluminum Roller rockers with billet steel briges
Camshaft tunnel Aline bored and hones, Bushed in every jurnal and coated bushings
ATI balancer
Oberg 6" custom oil filter system with Areoquip AN fittings and lines
Custom polished aluminum block off plates
100% filled engine Block, Ceramic epoxy painted Fire red, front cover painted Black
Fire ringed Block
4.125 bore
Deck plated
Copper head gasket
Fully ported cylinder head intake / exhaust/ valve pockets, valves lapped in and set
Head Ceramic Epoxy Painted fire red
Over size valves Stainless and inconel
Hamilton valves springs
Fire ringed head
intake plenum Cut of and machined for Banks Big hoss intake manifold(included)
ARP 12MM Head studs
HD Cromoly Push rods
24 valve style rocker cover
72 LPM II injectors
New push tubes
Tubular SS coated Headers w /T4 flange
S510 BW Charger for use with twin compounds
All New gaskets and seals, bearings, bushings
Engine built for 1500HP+ and 5000+ RPM, Nitrous and High boost.
Machined, Clearanced, Blueprinted, and assembled by NGM Diesel
95% assembled, just needs rockers,VC and fuel lines and pump installed to complete long block, Have all parts except Injection pump.
Many extras.
For purchase info Contact Mike
# 828 421 2181
Engine is Currently located in Maryland. We have good deals on engine freight too.
ZZ fab Aluminum oil pan with kick out
HD ARP Main studs
Internal balanced Crank, and matched "0" ballance rotating assy
Coated main Bearings
Aline bored and honed
Coated Thrust bearings
R&R H beam Steel billet Connecting rods.
Tool steel Light weight Wrist pins
Ross Aluminum pistons With special Bowl design and .150 valve reliefs Coated, with spirolocs
3 ring stack 1/16, 1.16, 3/16 Hellfire, Iron,stainless
Coated lifters and Hamilton "Big stick" camshaft
HS 1.5 over stock ratio Aluminum Roller rockers with billet steel briges
Camshaft tunnel Aline bored and hones, Bushed in every jurnal and coated bushings
ATI balancer
Oberg 6" custom oil filter system with Areoquip AN fittings and lines
Custom polished aluminum block off plates
100% filled engine Block, Ceramic epoxy painted Fire red, front cover painted Black
Fire ringed Block
4.125 bore
Deck plated
Copper head gasket
Fully ported cylinder head intake / exhaust/ valve pockets, valves lapped in and set
Head Ceramic Epoxy Painted fire red
Over size valves Stainless and inconel
Hamilton valves springs
Fire ringed head
intake plenum Cut of and machined for Banks Big hoss intake manifold(included)
ARP 12MM Head studs
HD Cromoly Push rods
24 valve style rocker cover
72 LPM II injectors
New push tubes
Tubular SS coated Headers w /T4 flange
S510 BW Charger for use with twin compounds
All New gaskets and seals, bearings, bushings
Engine built for 1500HP+ and 5000+ RPM, Nitrous and High boost.
Machined, Clearanced, Blueprinted, and assembled by NGM Diesel
95% assembled, just needs rockers,VC and fuel lines and pump installed to complete long block, Have all parts except Injection pump.
Many extras.
For purchase info Contact Mike
# 828 421 2181
Engine is Currently located in Maryland. We have good deals on engine freight too.
Last edited:
