Fummins Steed speed twin setup.

ninerqb8

ninerqb8

New member
Joined
Jun 12, 2009
Messages
632
Comes complete with both turbos 63/68/.83, 80/96/1.32, ED 50mm wastegate, custom t4 Steed Speed manifold, hot pipe, cold pipe, IC piping, air filter setup, JGS drive pressure filter. It was in a 04 F250. Can come with both IC pipes but the intake was machined off and set up for individual runner intake. Looking for $4500 plus the ride.
2013-06-24175224_zps9a63033e.jpg

2013-06-24175137_zps62f12668.jpg

2013-06-24175109_zps9ad48adc.jpg

2013-06-24175058_zpsb6142924.jpg

20121031_082342-1.jpg
 
Last edited:
Want to sell your injector lines to savve me the trouble of bending them like that???? I've got basically the same setup im building for my girlfriends fummins
 
syrupdawg said:
Want to sell your injector lines to savve me the trouble of bending them like that???? I've got basically the same setup im building for my girlfriends fummins
Click to expand...

They are .093 lines if that matters to you.
 
What are the individual ports in the runners of the exhaust manifold? This is a 12valve T4 manifold, correct?
 
dalenw said:
What are the individual ports in the runners of the exhaust manifold? This is a 12valve T4 manifold, correct?
Click to expand...

Yes t4 12 valve. The manifold is drilled and tapped for each cylinder egt probe and a drive pressure underneath.
 
syrupdawg said:
I thought they were .120s never the less can you PM me with a price on them? And also are you willing to sell the kit without the turbos?
Click to expand...

Ill get you a price for the lines and a price for twin kit minus turbos. Are you interested in the intake side IC piping as well? It is setup for the individual runner intake. Also have the lower radiator hose set up for the ford de gas bottle as well if you want it.
 
would you sell just the intercooler pipe on the passenger side plus the filter pipe and filter?
 
ninerqb8 said:
Ill get you a price for the lines and a price for twin kit minus turbos. Are you interested in the intake side IC piping as well? It is setup for the individual runner intake. Also have the lower radiator hose set up for the ford de gas bottle as well if you want it.
Click to expand...

Yes my head has one of keatings logs on it...is your intercooler piping 3" or 3.5"?
 
would you be willing to sell the steed speed manifold alone? Pm with price if so.
 
Ok piping, manifold, and and injection lines are gone. Still have both turbos, ed wategate and drive pressure filter.
 
You must log in or register to reply here.
Back
Top