Garage Clean Out - Core p7100, Turbo Smart Gate, Turbos/parts

JAyers93

JAyers93

C15H28
Joined
Jan 25, 2009
Messages
277
Cleaning out the garage.

New 50mm Turbosmart external gate. Still in original box will all pieces. $400 + shipping

Core p7100, came off a running engine that had no oil pressure. 867 pump I believe. $300 OBO + shipping

New BAE H1E 62mm kit. Has the compressor wheel, backing plate, and polished v-band cover. $250 OBO + shipping

S300g with a 68mm turbine wheel. No exhaust housing. Needs rebuilt (very light in/out shaft play), it came off the same engine that the p7100 above did. Has very low run time on it... two passes down the track I believe. $300 OBO + shipping

S362 with 74mm turbine wheel. Charger needs rebuilt. Compressor wheel has contacted compressor housing, compressor wheel is junk. Turbine looks okay but the shaft could be warped. No exhaust housing. $100 OBO + shipping

New S300 .83ar T4 non gated housing. Has short outlet and small T3 size volutes, would go great on the s300g above. $250 OBO + shipping

Two 1.10 ar T6 S400 exhaust housings for the 74mm turbine. One new and used. $50 + shipping for each

New s300 .88 ar T4 single volute exhaust housing for the 68mm turbine wheel. $50 + shipping

Core 4wd 518 trans...FREE...just come and get the thing. Im tired of seeing it. Has converter still in it. Was removed because truck would not move in any gear.

Can send pictures if interested.

Thanks for looking.
 
IMG_3980_zpscjif1x0r.jpg


IMG_3981_zpsey34pj76.jpg


IMG_3996_zpsxr2qhugk.jpg


IMG_3995_zpsywwkdgdh.jpg
 
Post #3 s300g (first two pics) and s362 (last three pics)
Post #4 .83ar (first two pics), .88ar (pics three and four), new 1.10ar (5th), used 1.10ar (last)
 
It was a 190hp I believe. I just had Farrell Diesel Service max one a couple weeks ago if your interested in the numbers.
 
Whats left:

New 50mm Turbosmart external gate. Still in original box will all pieces. $400 + shipping

New BAE H1E 62mm kit. Has the compressor wheel, backing plate, and polished v-band cover. $250 OBO + shipping

S300g with a 68mm turbine wheel. No exhaust housing. Needs rebuilt (very light in/out shaft play), it came off the same engine that the p7100 above did. Has very low run time on it... two passes down the track I believe. $300 OBO + shipping

S362 with 74mm turbine wheel. Charger needs rebuilt. Compressor wheel has contacted compressor housing, compressor wheel is junk. Turbine looks okay but the shaft could be warped. No exhaust housing. $100 OBO + shipping

New S300 .83ar T4 non gated housing. Has short outlet and small T3 size volutes, would go great on the s300g above. $250 OBO + shipping

Two 1.10 ar T6 S400 exhaust housings for the 74mm turbine. One new and used. $50 + shipping for each

New s300 .88 ar T4 single volute exhaust housing for the 68mm turbine wheel. $50 + shipping

Core 4wd 518 trans...FREE...just come and get the thing. Im tired of seeing it. Has converter still in it. Was removed because truck would not move in any gear.

Can send pictures if interested.

Thanks for looking.
 
JAyers93 said:
It was a 190hp I believe. I just had Farrell Diesel Service max one a couple weeks ago if your interested in the numbers.
Click to expand...

I'm interested in what the 190 pump will do. What did it flow and what mods did he do (gsk, fuel plate, dv's, ect).
I have a low mile 190 recon pump I'd like to use on an engine I'm rebuilding instead of the high mile 160 pump that needs gone thru.
It's going to be a low power (under 400hp) towing engine so I know it probably wont need maxed out. I was wanting Seth to balance and add a 3k gsk but he didn't act to impressed with a 190 pump so I'm not sure what to do.
 
Is the s362 a t3? Decent street turbo??
Bae upgrade work on an h1c?
 
The S362 does not have an exhaust housing but yes, it would make a nice street turbo after it has been rebuilt.

The BAE upgrade will work with an H1C or a WH1C.
 
Interested in the 518 but its about a 10 hour drive so not sure how soon I could make the trip.
 
Whats left:

New 50mm Turbosmart external gate. Still in original box will all pieces. $350 + shipping

New BAE H1E 62mm kit. Has the compressor wheel, backing plate, and polished v-band cover. $250 OBO + shipping

New S300 .83ar T4 non gated housing. Has short outlet and small T3 size volutes, would go great on the s300g above. $250 OBO + shipping

Two 1.10 ar T6 S400 exhaust housings for the 74mm turbine. One new and used. $50 + shipping for each

New s300 .88 ar T4 single volute exhaust housing for the 68mm turbine wheel. $50 + shipping

Core 4wd 518 trans...FREE...just come and get the thing. Im tired of seeing it. Has converter still in it. Was removed because truck would not move in any gear.

Can send pictures if interested.

Thanks for looking.
 
You must log in or register to reply here.
Top