Georend low stall T/C question

[HIGHGEAR05]

The other day I did some pressure test on my transmission. On one of the test, I checked to see when my T/C was grabbing. My engine idles at 750 RPM and the T/C starts to grab at 800 RPM. Is this normal, or will this hurt the tranny any. I have a 900/400 T/C. Thanks

 

[ctd8999]

The other day I did some pressure test on my transmission. On one of the test, I checked to see when my T/C was grabbing. My engine idles at 750 RPM and the T/C starts to grab at 800 RPM. Is this normal, or will this hurt the tranny any. I have a 900/400 T/C. Thanks

Give Dave a call he'll answer your question for you. Thanks Steve B.

 

[Justice4all]

The other day I did some pressure test on my transmission. On one of the test, I checked to see when my T/C was grabbing. My engine idles at 750 RPM and the T/C starts to grab at 800 RPM. Is this normal, or will this hurt the tranny any. I have a 900/400 T/C. Thanks

It's a great converter, I have the same one. What you're describing sounds normal. You're fine to run it.

 

[torque beast]

same one here--no problems