GlowShift gauge problem....

Oddfire

Oddfire

bark'n
Joined
Apr 11, 2009
Messages
36
Picked up a used set of gloshift pyro and boost gauges today and I cant get the boost gauge to behave. There are 4 wires coming out the back and I was wondering if (since they didn't come with instructions) anyone remembers how they go....:Cheer:

I figured it was a normal pressure gauge and that is you just plumb the line, if you give it pressure, it should read. I gave it about 35lbs and no go. :what:
 
*Boost*
Black- Vehicle Ground
Purple-switched 12V source
Orange-switched 12V source
Yellow-Constant 12V Source
(Combine purple and orange into one wire and run it to a switched 12V source in the fuse panel using a fuse tap. Ground the Black. Hook yellow up to battery.)


*Pyro*
Pink-to probe
Blue-to probe

Black- Vehicle Ground
Red-Switched 12V source
Yellow-Constant 12V source
 
You must log in or register to reply here.
Back
Top