GM 465 to NV4500

[mrsmith]

I've done quite a lot of searching and haven't exactly what I'm looking for info wise, I have a 78 chevy small block with a 465 4 speed and a np203 behind it.
I want to swap the 465 for a NV4500 for now, and eventually take out the small block and put in my spare 12V.

Finding an adapter for the NV to 203 was no problem, I need to know what I need belhousing wise.

thats in advance,

Mike

 

[malibu795]

NV4500s came in 89-2000 GM trucks. including 6.2/6.5 diesels


most were HYD clutch linkage setups

 

[CrewCab59]

If your Nv4500 is a 93-95 your going to need the Gm / Cummins adapter set because the the case has a different bolt pattern for the bell housing and the front input shaft and seal retainer can't be swaped .The 96 and up GM Nv4500 you can use the stock 5.9 bell housing and engine adapter plate and then the input shaft and bearing retainer swap to use the dodge clutch .