Gov. Spring Question

kkitelinger

Member
Joined
Aug 10, 2006
Messages
42
I have a 913 pump I am getting ready to put on my 95 and when I went to put in a 3k GSK kit I found that the pump already has 4 springs in it. Is this normal for a 913 pump. I thought they all had 3 unless you put in a 4k kit.

Thanks for any help
Kyle
 
kkitelinger said:
I have a 913 pump I am getting ready to put on my 95 and when I went to put in a 3k GSK kit I found that the pump already has 4 springs in it. Is this normal for a 913 pump. I thought they all had 3 unless you put in a 4k kit.

Thanks for any help
Kyle

Kyle, if I was you I would call "THE" Jeff Garmon and get a set of his 5K spring's. There is a thread in here called "Hold my beer" on this very subject. I have a 97 with the 5K's and they are the shizzits. Gary
 
It's up to you if you want them now or later but I'm going to see if Jeff will sell me a set of these springs, if he will I will give you and the board a document worth of before and after data on them verses 4K's as I've made a hard run or two in my time :rockwoot:

Jim
 
Back
Top