Hamilton 110# springs. Are they all beehived or only 12 of them?

[Light It Up]

Ok it says that the springs with Blue stripes on them go on the intake valves now I can not find any way that they are beehive. Now the springs that go on the exhaust valves ( no stripe) I can tell which side is bigger. Are the exhaust valve springs the only ones that are beehived? Thanks

 

[cumminalltheway]

i saw once that they are all bee hive and you have to measure them to see which side is the bigger side.

 

[Light It Up]

The exhaust valve springs are for sure beehived but I honestly dont think the intake springs are.

 

[Hamilton Cams]

When we moved the OD in a bit it pretty much wiped out most of the beehiving on the intake. This was done to clear some casting flaws we encountered on some heads. It does not matter which way they are installed, as long as they are all on the intake.

Zach Hamilton

 

[Light It Up]

Ok thanks Zach.

 

[BgBlDodge]

Put the retainer on each end and see which end has the bigger overhang. That's how I figured mine out.