HD12VS springs

[jedeka]

Can you tell me the O.D. of these valve springs? Any work needed to the spring pocket? Thanks.

 

[Hamilton Cams]

I am on the dyno today, I can get you measurements tomorrow.

They do not require any machining unless you are running a cam with .360" or more lift and you don't have enough installed height.

For the big cams over .360" you need at least 1.880" installed height minimum.

Zach

 

[Smokem]

1.445" correct?

 

[jedeka]

Hey Zach, any updates on the questions I posted? Thanks.

 

[Hamilton Cams]

Sorry, been a little hectic. I am working from home tomorrow and won't be in unitl after noon. If you need an answer early call Ryan at 1-512-778-9418 and he will get you all of the info. Otherwise I will get that info later in the afternoon.


Zach

 

[jedeka]

Afternoon will be fine. Thanks Zach.

 

[Dieseljet]

Jedeka, The O.D. of the 12vs-1 is 1.440.

 

[Hamilton Cams]

1.398" +/- .005 depending on where it is measured. Diesel jet had not had his coffee yet.

Zach

 

[jedeka]

Are retainers and locks included with the springs?

 

[Ruben774]

Are retainers and locks included with the springs?

^x2

 

[Hamilton Cams]

Yes they are