Head Stud ?'s

ACFarmer

ACFarmer

On to the next project
Joined
Apr 29, 2009
Messages
869
Getting ready to stud my 03 and I dont have o-rings either. Do I really need to go with the 625's or will the 2000's be plenty fine with me? I'm taking the tractor up to the 2.6 pulling class so my sig isnt really up to date. Will have a 2.6 charger and more like 200 hp injectors and big cp3. What do I need???
 
The CR guys have been getting along fine with 2000's and the stock Gasket Derek...even with twins.

Heck, most have been running stock bolts and getting along fine too.

Chris
 
yeah i know... but with my luck... lol so I figured I do it just to be on the safe side and only have to do it once.
 
:hehe: :hehe:

Only do it once...that would be nice!

Unless you really plan on going wild with it, the 2000's should be fine!
Chris
 
2000s are fine for you. if you dont have them let me know im not too far away have them in stock most of the time.

ted
 
The standard ARP's will work fine for a single 2.6 charger, fuel only.

If you ever plan on spraying, or going with twins, save yourself the trouble and jump straight to the 625's.
 
I think I'm just going to go with the 2000's. This wont ever be over a 2.6 truck on fuel only I dont think lol.... plus that leaves me with more money for more fuel and air

p-pumped- thanks but I carry all this stuff myself so thats not a problem lol... I'm still learning on these new trucks, I'm used to the old VE and P-pumped 12 valves.
 
Signature600 said:
:hehe: :hehe:

Only do it once...that would be nice!

Unless you really plan on going wild with it, the 2000's should be fine!
Chris
Click to expand...



Yeah I know!! It never seems to work that way for me though:poke: I'm sure I'll do all this work and end up with the engine tore out of it this winter so I can be remotely competitive....

Oh and why dont you guys sell me that 8050 you got over on our lot good and cheap that way I can afford to keep farming!!:hehe:
 
Signature600 said:
If it was up to me it would be gone by now...but it's not up to me on that one:D

Chris
Click to expand...

Well convince your dad lol.... oh and tell him I aint forgot about what he told me on that grain table for my L2. I just need to get the time to come over and see what he thinks on one. Waaaayyyy too many projects and nowhere near enough time seems like
:thankyou2:

Derek
 
You must log in or register to reply here.
Back
Top