Help Identify Turbine Wheel

[BullfrogJohnson]

I just got a s400 charger and I need a to find a new exhaust housing for it. Taking measurements with my caliper I am getting 87.40mm inducer and 80.30 exducer. I have a housing for a 88mm inducer but the exducer is to small for this charger.

Anyone know what wheel I have and is it a stock S400 wheel.

Thanks
Travis

 

[bgilbert]

S400sx maybe? Got a part number?

 

[BullfrogJohnson]

Charger has a extended tip compressor wheel but the serial tag is gone.

 

[BullfrogJohnson]

I have a casting number for the exhaust housing that came with it if that helps

# is 694203 100-289

 

[Schevyii63]

I beleive thats a 74mm 1.00AR housing.

 

[BullfrogJohnson]

I beleive thats a 74mm 1.00AR housing.

I have another 74mm housing in a 1.10 it will not fit.

Anyone got any ideas? I am lost on this one

 

[zstroken]

It is a borg wheel, it is the 87x80 turbine wheel. The one that is between the 96 and the 83. You can get the 83x74 mm turbine housing cut for probably $100 or so.