Help with downpipe

[Tmi_13]

I have this custom made turbo, i think the exthoust side is from HX50 and i would need to find a downpipe flange and band for it, or part number for them. The Cummins m11 engine uses this turbo so i could get part´s from Cummins if i had part numbers. Size is 4,5 inch measured from outside

 

[LReiff]

Contact Jeff@Mumau Diesel (Snedge) on here, he is a Cummins dealer. You should also spend some time checking out the large vendor section!

 

[SuperiorRam]

I have a dp
And if you live anywhere near civilization there should be a otr truck store that has one, I know my local one has every flange known to man

 

[Tmi_13]

Thanks for reply, sorry no civilization here, i´m from Finland. I found some Cummins part nro´s so i´m going to our local Cummins dealer on monday, will see if they have it.

 

[Delinquent]

I'm pressty sure it's a full marmon flange. And where to find them in finland...? The one I had, I made from a Junkyard flange, cut off and welded on to a regular downpipe.

 

[Tmi_13]

Got the clamp from Cummins, if somebody need one, here´s part nro´s:
3896337, clamp
200766, 90 degree turn that fits hx50 (didn´t buy it, very expesive)