High flow fuel filter?

[Lostnwalmart]

I'm building an a1000 setup for the truck and have everything but the filter head and filter picked out. Any suggestions? I can I use my airdogs filters and buy pass the pump/relive valve? Thanks fellas!

 

[wildman6bt]

Here's a thread I started and its got some part numbers.
remote fuel filter - Competition Diesel.Com - Bringing The BEST Together

 

[pierce460]

I would use this as a prefilter to keep the A1000 happy.
Aeromotive12331 - ORB-10 Shutoff Valve Fuel Filter
Then use this filter head, and go get a good fuel filter from your local auto part store.
Lenz Hydraulic Filter with Housing Assembly - 1822609 | Tractor Supply Company

 

[12vriviera]

check out http://www.wixfilters.com/
dig around for a filter, you can search by thread pitch and size and oring diameter..
in the specs are flow gpm..

 

[bsmith]

Bladwin filter base. Fb-1311, should be under 30 bucks. Has 1/2" or bigger inlet and outlets, can't remember excatly.
14tpi

 

[TMONEYDIESEL]

Call Snedge (Jeff Mumau) he has them and the filters!!

 

[Wrangler_fb_33]

The baldwin base and Cat 1r-0749 should flow plenty shouldn't it?

 

[bsmith]

The baldwin base and Cat 1r-0749 should flow plenty shouldn't it?

That's what I run.

 

[TMONEYDIESEL]

Call Snedge! 724-354-3994

He has them in stock!

 

[Lostnwalmart]

Haha I did call Jeff but he was out today.

 

[TMONEYDIESEL]

I would suggest a loose filter before the pump and a 2 after. Ive noticed that alot of the guys installing sumps are not cleaning out there tanks properly during install and just cutting the whole and putting them in causing issues to inline pumps from the plastic and trash flowing into the LP first. Throw a filter before to catch the trash and a filter after to really filter down the fuel.

 

[Timmay]

Cat is one of the better 2 micron because its a absolute not a nominal filter, so its rated at like 98.6%@ 2micron vs nominal ones are generally 2 micron @ 48% or something

 

[Trapper]

I ran the Cat 3406 on my Fummins. And it seemed to work great.

 

[straight 6 roar]

What do those Baldwin bases run?

 

[bsmith]

Bladwin filter base. Fb-1311, should be under 30 bucks. Has 1/2" or bigger inlet and outlets, can't remember excatly.
14tpi

What do those Baldwin bases run?

I think I paid 26 about 4yrs ago or so.

Lubefiner has one similar for around 20 bucks.

 

[Lostnwalmart]

Fuel Filter Base, Base/Separator, FB1311 - Oil, Air, and Fuel Filters - Automotive Mechanical - 4ZKA7 : Grainger Industrial Supply

 

[wildman6bt]

I think there's a napa one or you can get the Baldwin there.

 

[wildman6bt]

Aftermarket remote fuel filter head? - Competition Diesel.Com - Bringing The BEST Together

 

[Charger]

the Filter Barn is worth a look

 

[captain_stabbin]

what gph does the a1000 flow?