Hooking up S300 based turbo steel braided oil line?

[turboman1]

I bought an S300 based turbo recently and the old hx-35 oil hook up does not work with the new turbo. The old setup contained a nut on the oil box that recieved the braided steel line. The new turbo does not have the nut but rather a flat surface with two outer bolt holes and the center hole for the oil passage.

Do you guys just use fitings to make it work or is their another braided line I can get that will just bolt right up?

Thanks
Adam

 

[wdimig]

get ahold of Chris at Engineered Diesel, he can hook you up with a flange with the same thread as the holset turbos so all you need to do is remove the inverted flare to STORM fitting out of the stock turbo, and instlal it into the new flange that bolts to the s300 with a gasket.

Wes

 

[carfichris]

We've got the adapter you need Adam as Wes stated. Shoot me an email chris@engineereddiesel.com and we can get one out to you.