Hp build??????

[buttercuprubber]

hey im looking to hit the 600hp mark i plan on mayb going wit a superphat shaft and mp8 ts also i plan on pulling. i already have smarty on demand, ats intake horn, afe stage 2, 5inch exhaust, ats exhaust manifold. i plan on installing a sbc dd 3800:kick:

 

[Big Swole]

Add a Stg. 3 Floot It Cp3 and a Set of Flux 2 or 2.5 injectors and you'll be close..

The SPS 62 may limit you a bit though...you may hit 600 but it'll be a HOT 600...

You'll need the TNT tune for you Smarty and the MP8 or some form of pressure box...


.02

 

[buttercuprubber]

oh and thinkin of using a superphat shaft 66

 

[farmboykjb5.9]

Here's what i'd do, silver bullet, flux 3's, and floor it stg 3.

 

[buttercuprubber]

:stab: you basterd u stole my icon lol but isnt a silver bullet more drag race setup

 

[buttercuprubber]

and flux 3 isnt that seem overkill

 

[94 12valve]

:stab: you basterd u stole my icon lol but isnt a silver bullet more drag race setup

the silver bullet is not bad at all on the street, I had one on my 12 valve for a while and I could still pull the car trailer with no problems

 

[farmboykjb5.9]

You'll be able to control lag a lot easier with a 6 speed so i wouldn't be afraid of it especially if you have the fuel to light it.

 

[farmboykjb5.9]

I wouldn't go any smaller than flux 2.5s if it were me

 

[buttercuprubber]

kk well im still debaiting bc i want a daily driver bc i drive 40miles a day highway for work but i still wanna pull so idk wat would b agreeable hp level for my use

 

[buttercuprubber]

and wats floor it 3 is it like a bad of parts or just all new upgrade cp3 and hoe much is the floor it

 

[Big Swole]

and wats floor it 3 is it like a bad of parts or just all new upgrade cp3 and hoe much is the floor it

Floor It is the Company

John is the person you should speak with or find a Floor It Dealer

Stage 3 is the level of pump that John makes / mods that will hold the power level you are looking for. Plus Some!!

Get with John on Upgrading your own pump to a stage 3 or find a dealer that will swap you one...John may swap it for you as well as long as your pump is in good shape and buildable...He'll just charge you a core fee until he finds out!!

He's a great guy with Quality work!!

Floor It Diesel- 785-842-8545