Ht3b Wheels

[strongarm302]

Got an HT3B, rebuilt it, putting a new exhaust housing on it because it had a 36cm, way to big, ended up with a 27cm divided, now it wont fit over the exhaust wheel, where would a get a different exhaust wheel?

 

[zukgod1]

You could possibly have the housing machined to clear the wheel instead.

I've not tried that on the HT3B so I cant comment on how effective it would be I have however done it on smaller turbos and by smaller I mean tiny in comparison.

 

[strongarm302]

i had thought of that, would that mess with the airflow and its efficency?

 

[roachie]

It does, but how much is a guess at best. Is the housing you have a ht3b or for another turbo?

 

[SuperiorRam]

I think the 27 is off a ht60 or ht3E

 

[strongarm302]

Compressor Housing numbers

27 exhaust housing

36 exhaust housing

Center section

Here's some numbers off of it, If that helps

 

[mathews8pt]

I know where a 23cm housing off a 3b is sitting if you want to go that route

 

[Timebomb]

What number is stamped on the inside divider ?

 

[B18B1LS1]

Is the 36cm physically too big or are you just worried about spooling it? FWIW mine has a 32cm and it does fine. I would try it and see what happens, then switch it out if you don't like it.

 

[98andahalf]

<------- has an ht3b with a 27cm exhaust housing for sale for only $200.....

 

[strongarm302]

I know where a 23cm housing off a 3b is sitting if you want to go that route

PM me.

3522416 are the numbers on the center section.

and the 36 is to big for what i was planning on doing, that and it was cracked out like water got in there and froze. Didn't seem to damage anything else, but i've rebuilt it since anyways.