HTT 62/13/65 stainless turbo NEW

A

ataboy9026

New member
Joined
Jan 26, 2008
Messages
109
Brand new turbo for 3rd gen bolt on. Has Stainless Diesel spring waste gate control. I also have a Floor-it diesel stage 2 CP3 pump that's never been ran. And 03-04 injectors from JL Machine 75 horse, they are still in my truck driving every day and have about 15k on them.
 

Attachments

  • image.jpg
    image.jpg
    61.2 KB · Views: 0
trying to load pics from my phone.... seems to only load one at a time. I do have the complete spring wastegate control, I notice its incomplete in this pic. I also have a Banks Big head wastegate control that goes with, it is used but good.
 
What percentage over stock is this CP3? Having trouble finding any info on it. Seems as if they're out of business.
 
CP3 is 30% over... its probably same as Industrial Injection stage 2. they sell for over $2000
 
were the injectors brand new or re-mans? do you happen to know if they are the new or old style bodies?
 
the injectors I bought as a core set that had 100k on them. 3 of them had been changed under warranty 10k before I got them. I had them tested at DIS in Grand Rapids MI before John Link did them and of corse the other 3 tips were bad. I bought 3 new Bosch tips and John did them up. I had them re-tested after John got done with them to be sure they were all good. And I've had them in my truck for about 15k. So the bottom line is 3 of the tips had about 10k on them before modification. I have a 2 micron filter setup along with stock filter so no crap was ever ran thru them. Anyone is welcome to ride in and see truck run before purchase. I'll need a week or so to get them changed back to my stock ones.
 
Interested in a trade for a Phat Shaft 64/80 for your 62?
e2ezema5.jpg
Also brand new in the plastic. .

Spelling errors should be ignored from the cellular device.
 
not interested in Phat Shaft trade. I am wanting a good he351 to put on my 97 12 valve... and I also need a 94-02 front dually center cap and a exhaust brake for my 97.
 
I should be clear... the Turbo and pump have never been ran... its just the injectors that are in my truck right now.
 
I am no longer needing a he351 as I got a exhaust brake for my hx35.... all is still for sale. I may take a 47re 2wd core and/or 97 auto PCM/wire harness in partial trade
 
I got turbo from Stainless Diesel a few years ago and never got around to putting it on my 03. It is "bolt on" for the 04.5+ and I bought a used elbow off ebay to use on my 03 when I put it on. I also have a downpipe and a 24 valve manifold I was gonna use for a twin install that I forgot about. Dang, times fly and projects get forgot about.....
 
You must log in or register to reply here.
Back
Top