HX40/HT3B twin turbos

TURBOLVR

TURBOLVR

Mr. Whipple
Joined
Mar 23, 2008
Messages
2,566
set of twins for sale just pulled off truck w/less than 5k miles!
Fresh ported HX40 with 6 blade compressor & stainless heat shield, wrapped hot pipe, cold pipe w/boost fitting,5">4" tapered down pipe, intake pipe, AFE ProDry S filter(1 month old!), fresh HT3B, oil feed to bottom turbo & drains for both, I/C pipe and all boots/clamps needed.
Always shut down under 300* and never over 55psi(no head studs) capable of cooling 700hp. Going a different route w/truck.

Priced to sell fast @ only $1700. :cheer:
 
I raced him at Island and this setup is awesome! He is a good honest person and if it weren't for him loaning me some tools I wouldn't have made it home.

Paul
 
Thanks Paul! :thankyou2:
here are some pics :
 

Attachments

  • 1012081231.jpg
    1012081231.jpg
    61.3 KB · Views: 328
  • 1028081401.jpg
    1028081401.jpg
    63.2 KB · Views: 278
HX40/HT3b set sold!! Thanks to all who responded!:cheer:
Also have a HE341/HX55 towing set for $1600:st:
and a HE351/HT60 set for street/strip for $1900:ft:
inquiries welcome!:thankyou2:
 
How much power will the other two setups handle? And how would they both work on the street?
 
Does anyone have experience with the 351/60 twins? I need 650hp at less than 60 pounds of boost.. Anyone have actual numbers on these? Thanks,
Brad
 
turbos

Jpw about a phone number? email me ramster1998@hotmail.com



TURBOLVR said:
set of twins for sale just pulled off truck w/less than 5k miles!
Fresh ported HX40 with 6 blade compressor & stainless heat shield, wrapped hot pipe, cold pipe w/boost fitting,5">4" tapered down pipe, intake pipe, AFE ProDry S filter(1 month old!), fresh HT3B, oil feed to bottom turbo & drains for both, I/C pipe and all boots/clamps needed.
Always shut down under 300* and never over 55psi(no head studs) capable of cooling 700hp. Going a different route w/truck.

Priced to sell fast @ only $1700. :cheer:
Click to expand...
 
TURBOLVR said:
HX40/HT3b set sold!! Thanks to all who responded!:cheer:
Also have a HE341/HX55 towing set for $1600:st:
and a HE351/HT60 set for street/strip for $1900:ft:
inquiries welcome!:thankyou2:
Click to expand...

Are these still for sale?
 
:thankyou2:Thanks! I did 7 other custom twin sets this month. :rockwoot:
 
Are you building them in the truck or do you have jigs set up for them?

Also, is that 3" or 4" plumbing between the two? I've been curious if 3" would be beneficial?
Sean
 
I do/have used several sizes of tubing the ones in my DD/sig have 3" cold pipe and lite near instantly. I use 3.5" and 4" for bigger race sets. The smaller tubing increases velocity at the cost of top end flow or vice-versa.
 
You must log in or register to reply here.
Back
Top