HX60 St. Joe

[sauer implement]

I have a Brand New HX60 from St. Joe Diesel for sell it has a 3.15 air wheel with a 3.60 exhaust wheel with a modified 14cm wastegated housing looks to be from an HX 40 it has been bushinged down to 2.8 but can be removed. T4 foot $1800.00 cost $2800.00 new

 

[jpowel29]

What size is the compressor outlet and exhaust flange? Both V-Band?

 

[sauer implement]

it takes an HX-40 Downpipe they both take V-band clamps on the compressor outlet it measures 3.00 in the oring groove i am not really sure how i need to measure it thanks

 

[sauer implement]

any offers

 

[bgilbert]

3.6" turbine? Wouldn't of thought there's enough meat in an hx40 housing to fit such a wheel.

 

[zstroken]

Those are exactly my thoughts.

 

[zstroken]

I am curious with the t4 if maybe it is a 16 or 18 cm housing? A 16 would probably make a really good setup.

 

[jpowel29]

Any pictures of the turbo?

 

[sauer implement]

I looked at it again when i took these pictures and i don't know where i come up with 14cm but it is a 19cm and has had alot of work done to make it work

 

[JOHNBOY]

Argghh! I need to go search the couch for extra change. :doh:

Man I bet that would work good for me.

Are you looking for another turbo?

 

[sauer implement]

no not really

 

[Rods]

I saw one like that at skytower a few years ago they said it was almost 3k to get it done lot of work to get that turbine housing on

 

[jpowel29]

Would a 19cm be comparable to a 1.15 A/R housing. I am not sure how to calculate/convert between the two.

 

[Farmboypuller97]

give me a bottom dollar on the charger please

Thanks

 

[sauer implement]

It takes $1700.00 to buy the charger