I need part of the Rocker Arm assembly for a 03 CR ASAP!

[FlyingHighRacin]

Ok i have no idea as to what its called but I need the little plastic/metal cup that sits on the ball of the end of the rocker arm. I need one of these ASAP. Also if anyone knows if these can be bought seperatly I would probably just order new and go that route. Thanks Zach

 

[j-rod]

I can donate a complete rocker arm (intake or exhaust) for the price of shipping.

 

[smooky]

they cant be bought seperatly i broke a couple once

 

[FlyingHighRacin]

I can donate a complete rocker arm (intake or exhaust) for the price of shipping.

Let me check and see if it was a exhaust or intake and I will let you know. Thanks

Sent from my SCH-I405 using Tapatalk 2

 

[FlyingHighRacin]

I can donate a complete rocker arm (intake or exhaust) for the price of shipping.

Talked to my mechanic and its an intake rocker that I need the small plactic cup for.
Shoot me your info in a PM and Ill send you the money for shipping through pay pal

 

[SKYNYRD]

I replaced my rockers with a set from a VP44 engine and eliminated the plastic cup altogether.

 

[FlyingHighRacin]

I replaced my rockers with a set from a VP44 engine and eliminated the plastic cup altogether.

Thats what I plan on doing but just need the one so I can ge the truck back on the road. I dont have the time to wait until I can find a set of metal ones.

 

[duck_04]

if you still have the metal cup, you can run it without the clip. If the lash is set correctly, theres no way for it to come out. the plastic clip is just there to hold it in place for removal.

 

[rawdog]

I have a set of metal ones i will sell!

 

[Blueboy]

I have a set of metal ones i will sell!

How much.
Can you send me picture of them.

 

[ComnRailPwr]

if you still have the metal cup, you can run it without the clip. If the lash is set correctly, theres no way for it to come out. the plastic clip is just there to hold it in place for removal.

Several of mine are run like this.

 

[FlyingHighRacin]

Several of mine are run like this.

Yeah I still have the metal cup. So it ok to run like this? I'm running a Hamilton 188/220 what should it be set at with out the plastic or does the plastic not matter in the clearance?

Sent from my SCH-I405 using Tapatalk 2

 

[duck_04]

Like I said, the plastic clip serves no purpose other than holding the metal cup in place when the rocker is removed. You will be fine to run with out it. It will not change clearances any.

 

[FlyingHighRacin]

Like I said, the plastic clip serves no purpose other than holding the metal cup in place when the rocker is removed. You will be fine to run with out it. It will not change clearances any.

Good deal! Thanks guys!