II Phat Shaft 71.

[Rich Buckley]

II phatShaft 71(2.8 billet wheel) with .83 ar wastesgated housing. T4 inlet and 4'' HX40 outlet. i drove it on the street in a 7800lbs dually for a week and it spooled great. then we put that motor in my 1/2 ton race and put about 15passes on it. was going to use it on a street truck i am workin on but i think i am going to use a set of twins i have. it has push my 1/2 to to a 10.02@136in the 1/4 and a 6.41@110mph in the 1/8 with fuel only. it has never seen any nitrous. looks new ,shaft looks and feels new. Lookin for $1300.00 obo with free shipping. will also look at some trades for nitrous parts(bottles, nozzles, solenoids exc) or any other hp parts from a 24v or 12v. pm me or call (205)533-0453.

 

[FosterW]

Whats with the 26v, twin p-pumps, and quad turbos?

 

[9 LIVES]

He likes to switch it up a bit:evil

 

[jktcummins]

always interesting to try things no one else has thought about.

 

[CumminsPOWER]

What kind of fuel would it take to spool one of these?

 

[shiftycapone]

What year was the dually and what were the mods? Auto or manual?

 

[RascalMafia]

What are you looking for in the way of nitrous?

 

[03halfton]

anyone run one on a 12V? curious how spoolup would be

 

[Rich Buckley]

00 dually had p-pump 24v 13mm pump,DDP250hp, and a little cam. it was an auto with 3.55 and 35's

 

[Rich Buckley]

What are you looking for in the way of nitrous?

i need some more bottles, soleniods, nozzles, lines. look in to trying some things.

 

[Ilikebikes]

I have one on my 12V (only difference in a T-3 housing and no gate) and it spools pretty quick for a large charger. If you can drive with your foot out of it until you get some boost it's not bad on the street. Running a piers 13mm pump, DDP4's, and a looser than stock converter.

 

[Rich Buckley]

i had a suncoast 89% and it would light quick.

 

[stock600]

II phatShaft 71(2.8 billet wheel) with .83 ar wastesgated housing. T4 inlet and 4'' HX40 outlet. i drove it on the street in a 7800lbs dually for a week and it spooled great. then we put that motor in my 1/2 ton race and put about 15passes on it. was going to use it on a street truck i am workin on but i think i am going to use a set of twins i have. it has push my 1/2 to to a 10.02@136in the 1/4 and a 6.41@110mph in the 1/8 with fuel only. it has never seen any nitrous. looks new ,shaft looks and feels new. Lookin for $1300.00 obo with free shipping. will also look at some trades for nitrous parts(bottles, nozzles, solenoids exc) or any other hp parts from a 24v or 12v. pm me or call (205)533-0453.

6.41 ..... I thought you had gone teens or twenties with it? Im now running a HTT charger of the same size, need more track time but I can tell its going to rock and roll. Ryan

 

[stock600]

I found in one where you had said 6.39 and a 6.37 in another and now 6.41 just curious which it was? Either way it would make someone a nice charger for the money...
Ryan

 

[Rich Buckley]

6.37's were from this past weekend at the suncoast race. that was with our new Bullseye power turbo. the track was so slick you could not hook for crap.
6.41 was on a 10.02 pass. at the local 1/8 mile track it went a 6.2"s but mph was off a bit. the 10.02 and 6.41 was just one slip i pick up.

 

[Rich Buckley]

becareful with an S300 71/73 turbo. we had one and if you push it to hard it will break!

 

[Rich Buckley]

sale pending...

 

[97crewcab]

becareful with an S300 71/73 turbo. we had one and if you push it to hard it will break!

Thanks for that...:kick:
:hehe::hehe::hehe:

 

[9812VCTD]

The money order is in the mail....can't wait to get it!

Justin

 

[Rich Buckley]

Sold!!!!!!!