I'm looking for a fuel filter number

[turbomike]

I would like to add a primary fuel filter/water separator between the tank and the lift pump but I'm having trouble find a part number. I would like a filter that has a 30 to 50 micron rating and fits on a 1-14 spin on filter head. Does anyone have a part number for a filter that would work?

 

[Bobcat698]

I would try Vulcanperformance.com, talk to Eric.

 

[Jff24Gordn]

here is a set of numbers for ya.

Caterpillar Primary Filter/Water Separator 175-2949 (30 Microns) (threads 1-14 UNS-2B )
Fleetguard FS19683
Donaldson P551743
Baldwin BF1268
Wix 33005
Luber-Finer LFF8030
ACDelco TP1002

Caterpillar Secondary Filter 1R-0749 (2 Microns) (threads 1-14 UNS-2B )
Fleetguard FF5319
Donaldson P551311
Baldwin BF7587 (BF614, Standard Version, BF7633, Short Version)
Wix 33674
Luber-Finer LFF2749 (High efficiency version of LFF5823B)
ACDelco TP1322
Fram P8335
Purolator F75185
Hastings FF1056 (FF1007, Standard Version FF1079, Short Version))

Caterpillar Filter 1R-0750 (2 micron) (threads 1-14 UNS-2B )
Fleetguard FF5320
Donaldson P551313
Baldwin BF7633 (BF7587, Long Version)
Wix 33528
Luber-Finer LFF3347
ACDelco TP1326
Fram P8334
Purolator F65213
Hastings FF1079 (FF1056, Long Version)

 

[Jim Fulmer]

I'm not exactally sure on the thread size but you could add a Racor S3201S to the mix and put the see throught bowl on it. I can write you paragraphs of what poor filtration will do to Injectors.

Jim

 

[trik396]

I've got a brand new Racor setup with the bowl on the bottom for water drainage. I had it on ebay but no one bought it. I can send you pics if you're interested.
btw- I have 4 fuel filters on my truck. 75micron pre-pump filter, 2 - 2micron CAT 1r-0749, then the stocker. I like overkill and clean fuel...