Industrial injections Dragonflow 13MM P-pump

Highfinance97

Highfinance97

Garofalo Enterprises
Joined
Jul 30, 2006
Messages
5,135
I am selling this for a friend, he tried on ebay and had no bites.
I myself will be at the next few NADM sled pulls and will bring the clutch if need be.

Zip code 18411 Clarks summit

BRAND NEW, NEVER MOUNTED
13MM Dragonflow P-pump

Here is Industrial Injections description....

Dragon Flow

Built with 13mm pumps. The Dragon Flow P7100 pump delivers fuel up to 670cc at 4000 RPM and 800cc at 1000 RPM. Higher RPM settings are available up to 5000 RPM. Higher Timing adjustments are made upon request. Modifications are made to the aneroid for valet driving conditions. Torque curve values are modified. Core charge: $1000.00 (Note: If core being returned is from a 1994 or 1995 Dodge only $400 of the core charge will be returned)

(OFF HIGHWAY USE ONLY)

Cost: $3500.00
--------------------------------------------------------------------------

$3000.00 Neg + $1000.00 for core or a good core
 
I was just curious what this pump started out as. If it started out as a 160 pump, the 600 dollars they don't refund from the core charge might mean that they put a new cam in it. A pump with a new cam would be worth more than one with an old cam.
 
OK Here it is sorry II is... well some of you know how they are


It is a Cut cam and not just a 215 cam
So yes its a quick fill they said
 
I have run both with 13mm's and they both do good, the quick fill I'm sure will do better at higher RPM's but I didn't run there.

Jim
 
You must log in or register to reply here.
Back
Top