injector connector tube

[olred07]

Hey yall where can i get the o-rings for the injector connector tube for a 2001 isb

 

[Devan Manis]

Probably from cummins. If you have trouble finding them I might be able to get a part number for you.

 

[Mudn_1]

Pm Snedge, he'll hook you up

 

[jt3436]

Is there a write up on how to change the orings?

 

[4x4dually]

Pm Snedge, he'll hook you up

Beat me to it. Jeff will fix ya up.

 

[Devan Manis]

It's pretty easy, you just remove the injector line from the head and then pop the tube out with a little screw driver and there you have it, put the new o-ring on and put a little oil on them and pop them back in and hook up the line.

 

[jt3436]

So u don't have to pull the valve cover?

 

[olred07]

no sir, 4.85 each from dodge

 

[Devan Manis]

no sir, 4.85 each from dodge

ouch, I got six for eight.

 

[jt3436]

That was easier then I thought. To bad it cost $30

 

[olred07]

i just did it last night for the first time and i took all the injection lines off then pulled the tubes. about 2 hours and i talked alot while doing it