Injector Flow Chart

99_SilvrCummins

New member
Joined
Feb 5, 2009
Messages
202
I am pretty sure I saw a chart inserted into a post that had how the different hole sizes and amount of holes compare for flow. I can't find it now and wondered if anyone has it handy to post up and I can copy it to my computer.

Thanks

Looking for a 200ish injector for a 64/71/13ss and I would like to compare.
 
5x.012 = .000565
5x13 = .000663
5x14 = .000769
7x10 = .000549
7x12 = .000794
6x13 = .000795
5x15 = .000882
6x14 = .000923
5x16 = .001005
6x15 = .001059
7x14 = .001077
5x17 = .001134
6x16 = .001206
5x18 = .001272
6x17 = .001360
5x19 = .001416
6x18 = .001526
5x20 = .001570
6x20 = .001884
5x22 = .001900
5x24 = .002261
6x22 = .002280
5x25 = .002459

Sent from my Galaxy Nexus using Tapatalk 2
 
Whoops sorry I thought you were looking total cross area not actual flow numbers

Sent from my Galaxy Nexus using Tapatalk 2
 
You cannot accurately calculate nozzle flow by orifice sizing, there are too many variables.
 
I guess I should have worded my question differently but the numbers posted did help me.

Smokem you have a pm.
 
Back
Top