injector help

[firemn260]

I was told they are brand new 100hp injectors installed lest then 1k miles ago. The nozzles are pretty soothed up and the only number on them are 854. Can anyone tell me what they are by that number?

 

[copenglenn]

You'll need to pin check the holes to verify what the hole size actually is.

 

[firemn260]

I looked up pin checking the hole size and came up with nothing. Is there a set of different gauge pins to determine size or use a pin then measure with a micrometer?

 

[copenglenn]

http://www.mcmaster.com/#pin-gauges/=wjszvg
Something like this but if you don't want to spend any money on them I will check them for free if you want to send them to me.

 

[firemn260]

http://www.mcmaster.com/#pin-gauges/=wjszvg
Something like this but if you don't want to spend any money on them I will check them for free if you want to send them to me.

I appreciate that offer but I'm just going to put them in and run them. Thanks