injector size for motor break in

[bigorange]

was wounder what size of injector is good for breaking in a new motor. I'm about a month away from having my motor in and just had my injectors tested and 1 was veary veary bad and the other 5 were junk. I have a new set of f1's 5.1 but I was thinking that would be to big for break in dew to washing the walls down and contaminating the oil to much on a new motor. I was planing to get the old ones fixed and run them for break in they had 90hp tips but how since all 6 bodys are shot not sure what to do. any tips would be great thanks:Cheer:

shane

 

[bigorange]

any tips

 

[Joesixpack]

I think ideally break in would be done with some smaller nozzles, but I broke my engine in\then broke it with Don's 5's and still can't get over how clean and controllable they are. Don't get me wrong, put the screws to them and they bring on the heat BIG TIME.
I log my blow by tests and it was they were coming down as good as I've ever seen, ring seal was great.
I've got a set of stock injectors that I might try for break in.

 

[bigorange]

I was thinking that smaller ones would be better, just not looking forward to buying another set of injectors. my plan was to have 2 sets of injectors one big one small but I gess thats how it goes, at least I know why there was 26L's of fuel and oil in my motor lol. any and all tips would help thanks