July 14 poseyville indiana

Johndeere9610

Johndeere9610

Ford guy
Joined
Jun 2, 2007
Messages
629
If you guys are free july the 14th( this coming wednesday) there is an open class at the posey county fair. 8500lb and 26" hitch height are the only rules. 100% payback. starts at 7

Also the Midwest puller 2.6 class will be there 40dollar one time hook fee.
Must meet turbo rule.
 
Johndeere9610 said:
If you guys are free july the 14th( this coming wednesday) there is an open class at the posey county fair. 8500lb and 26" hitch height are the only rules. 100% payback. starts at 7

Also the Midwest puller 2.6 class will be there 40dollar one time hook fee.
Must meet turbo rule.
Click to expand...

$60 one time hook fee for the midwest pullers class. The guy in charge told me there may be money added to the 100% payback as well depending on the number of trucks.
 
outlaw99 said:
whats the turbo rule?
Click to expand...

Turbocharger: The vehicle is limited to a 9-1/2" (maximum compressor diameter) single charger with 2.6" maximum inducer no bushings or stepped covers will be allowed”. Charger is a Single 2.60"(66mm) measured at the smallest diameter of the compressor wheel (will be measure with a go-no go gauge) and the housing must be smaller than 2.65"(measured with 2.65"plug) from the opening to the wheel(a minimum of 3/4" of inducer bore before the comp. wheel), no tapering of the inducer bore or plugs allowed. 1/4" Map groove maximum allowed and no other ways of allowing air to the wheel other than inducer bore and map groove are allowed. Turbo must remain in the factory location as manufactured by the OEM. The turbo may be raised or lowered to accommodate aftermarket pedestals. Must fit stock hood. 6.4L power strokes with the factory twin turbo configuration will be permitted.
 
You must log in or register to reply here.
Top