Kenny's machine front drive fuel pump

what size thread is the in and out of that pump? I have one on the way and need to get fuel fittings for it.

I am planning on running my areomotive fuel regulator i had from when i ran the a1000, prolly have to mess with the pressure sittings of the regulator at idle to get the desired psi at full rpm. I'm thinking about 30 at idle.
 
33612633.JPG
 
That pump only works with Kennys front cover. And Kennys front cover does NOT fit a waterman. I found out the hard way at the last minute trying to get a waterman on the truck. Skyler, call Haisleys and they have what you need to put in the injection pump return (45psi) and the gear driven pump. You can get that to whatever psi you want. I have pics somewhere of it. Many on my wifes facebook I believe you want to see it. Ill try and dig them up and post it.
 
When we bought kenny's front cover for our truck he told us it was for his tuthill pump and that he could make it fit enderle or waterman just let him know beforehand.
 
Both the Tuthill and Waterman require the vacuum pump to be installed correct?
 
j-rod said:
Both the Tuthill and Waterman require the vacuum pump to be installed correct?
Click to expand...

Ya, Haisleys wacks most of it of and plugs the back so there isn't much but an oil line left. That's one thing I didn't take a pic of. We built an adapter to accept the waterman. The shaft was just long enough to reach from the waterman.
 
2Tone12V said:
Ya, Haisleys wacks most of it of and plugs the back so there isn't much but an oil line left. That's one thing I didn't take a pic of. We built an adapter to accept the waterman. The shaft was just long enough to reach from the waterman.
Click to expand...

That's good to know.
 
You must log in or register to reply here.
Back
Top