Killing a project, conglomeration of parts, 6.7 etc

Mark Nixon

Mark Nixon

No Savior among the flesh
Joined
Feb 26, 2009
Messages
8,678
2008 6.7 shortblock, has 2 mildly burned pistons, bores are unharmed, has @ 45k miles, comes with 2 OEM replacement pistons with similar miles, has oil pan, timing cover/case and damper, $2000/offer.

2001 VP head, has no cracks that I can see, was on an excellent running, but high miles (275k) engine, $400/offer.

VP injectors, appear to be 7x14s by a pin guage, unsure of who built them, they sprayed nicely into the OEM HO bowls, $500 SHIPPED/offer.

VP injection lines, stock size, with all separators, $100 SHIPPED.

BRAND NEW Bosch 192hp on-road VE injection pump, has no KSB control, BOSCH number 0460426148, $700 SHIPPED/offer.

NICE core non-intercooled VE injection pump, ALL there and not a rust pitted junker inside, $325 SHIPPED/offer.

2003-2007 AUTOMATIC block plate/spacer, $125 SHIPPED.

I'll entertain some trades for 2003-'04.5 Commonrail parts, such as a mild tuner, a little warmer injectors (50hp? 100hp?), upgraded turbo, etc.
PM, reply, or call 402-780-5127 for more information.
 
Neither here nor there to me.
Parts are replaceable and I have no problem finding parts. :)
How many 6.7 blocks or cranks do you want?

Bump it up.

Mark.
 
6.7 Shortblock is pending pick-up to-morrow.
All else is available.

Mark.
 
6.7 shortblock is available, again due to no call, no show.

Interested in the following trades:

Smarty (or equivalent) for 2003 early '04.
Decent injectors (50hp or so) mine are weak, just as well upgrade.
Upgraded turbo, something that tows well.
Exhaust.
Boost fooler.
SILVER dually bed, don't need to be perfect, but nice would be appreciated.

FWIW, I do have some other CR stuff that's on the table, as well, OEM 2003-2007 turbo CORES, couple of longblocks, a couple heads and other miscellaneous pieces, oil pans, etc.

Mark.
 
The 6.7 shortblock is SOLD and gone.

Here's pics of a really purdy 192hp NEW VE injection pump:
shinyVEpump3.jpg

shinyVEpump2.jpg


Mark.
 
Sorry, no I do not.
In case I happen to see one, which one are you looking for?
Manual or auto?

Mark.
 
do you have a CR 5.9 Crank that is in good shape?
also do you have a 06-07 5.9 wiring Harness and ecm thanks
 
I don't have an ECM or harness.
I do have a couple of good cranks, $450 each.

Where are you located???

Mark.
 
hey is that block plate spacer you mentioned the trans adapter from the block to the tranny? if so what's the chances a 47re will bolt to it.
 
FWIW, I do have some other CR stuff that's on the table, as well, OEM 2003-2007 turbo CORES, couple of longblocks, a couple heads and other miscellaneous pieces, oil pans, etc.
Click to expand...

Fleece was buying cr turbo cores.
 
wildman6bt said:
Fleece was buying cr turbo cores.
Click to expand...
I seem to recall that being mentioned, I have a few of both the HE351cw and the 341.
I should call Fleece up and see if they are still looking.

Thanks for mentioning it. :)

Mark.
 
FYI, I did some looking and I do have couple of GOOD HE351cw turbos.
I also have a couple of GOOD 2003-early 2004 341s, as well.
They have been checked for turbine and compressor damage and have none.

$325 SHIPPED each.

I also have a 2006 engine harness consisting of BOTH harnesses from the computer, $225 SHIPPED.

Mark.
 
Last edited:
You must log in or register to reply here.
Back
Top