KORE leveling kit

Z

ZJARCHER

New member
Joined
Jan 25, 2008
Messages
361
3rd gen kit.

- Variable Rate Coils
- 2.0" Bilstein 5100's
- About 3.0 inches of lift in front
- Variable rate coils for Standard, Quad and Mega Cabs, Diesel
- Bilstein 5100 6681 shocks provide increased wheel travel
- Rear leaf springs unchanged

I ran this on my 98 for literally 2 hours (Just finished about 3 hours ago on the install), come to find out I need the Hemi coils for my truck due to the lift height difference. It lifted my truck about 5.5-6" or so, just too high for my taste. I bought it used, it was used since May on his truck, so still very new.

$275 plus shipping.
 
Why it rise you front height 5.5-6 inch ?

What type of cab you have?
 
3rd generation diesel coils on a 2nd gen truck I guess. I called them and they said they run about 2.75" taller on 2nd gens. Quad cab truck...
 
I have same springs, just need to install ,but I need only 3 inch lift. :bang
 
ZJARCHER said:
3rd gen kit.

- Variable Rate Coils
- 2.0" Bilstein 5100's
- About 3.0 inches of lift in front
- Variable rate coils for Standard, Quad and Mega Cabs, Diesel
- Bilstein 5100 6681 shocks provide increased wheel travel
- Rear leaf springs unchanged

I ran this on my 98 for literally 2 hours (Just finished about 3 hours ago on the install), come to find out I need the Hemi coils for my truck due to the lift height difference. It lifted my truck about 5.5-6" or so, just too high for my taste. I bought it used, it was used since May on his truck, so still very new.

$275 plus shipping.
Click to expand...

Interested!
Shoot me a PM
This is for a third gen correct?
 
You must log in or register to reply here.
Back
Top