i have a 93 ctd, and was wanting to put twins in it, so i was wondering if yall could show me yalls setup and what kind of hp you are push with the setup you have. Thanks
Mine is your basic, Tried-&-True HX35 Hybrid over an HT3B. The 35 runs a 14cm waste-gated (set @ 26psig) exhaust housing and the 3B runs a 21cm.
The fueling is via the typically tweaked 12mm VE IP, Walbro electric lift pump, AN6 fuel lines, DDP4s (regular), etc.
With a PDR stg4ish ported head, stock/OEM cam, etc, it comes up with 405HP and 840 ft/lbs (405 HP & 900 ft/lbs with a whacked W/M squirt. I gotta fix it). At the top of a 1/4 run, the EGTs are no higher than 1350*F at a little over 65 psig boost.