Lifting rear end temporarily

[NPloysa]

So I screwed up my air ride I am working on the fronts, going to get 3" total, 2" lift and 1" level. I will lift the rear 2" but only have the front mostly done.

So, I screwed it up by not adding enough of a spacer to get my 3", only 1.25". So, if it levels the front by 1.25" can I add .25" or .5" spacerers between the springs and spring perch on the rear, temporarily until the rear bag system is done? Will I have enough length on my U-bolts (I will measure tonight).

Thanks, Nick

 

[Timbeaux]

Shims? I wouldnt add more than one. They tend to break.

 

[NPloysa]

Probably 3x6" steel shims, .25" or .5" thick

 

[Billysgoat]

Drill it for the locator pin on the stock block unit and if you can add a pin for the stock axle housing and you should be fine for daily driving (i.e., no rough stuff).