1998 24v after sitting for a few hours it will crank for a long time before starting, if it sits over night or a couple days I have to crack the feed line open at the injection pump and let the lift pump run for a few seconds until I get fuel.then it fires right up. any ideas?
long crank after sitting
- Thread starter kapnhook
- Start date
dmigz57
New member
- Joined
- Feb 7, 2010
- Messages
- 661
Bingo. O-ring on #6 went out on me before which caused it to loose prime.
DISTURBED
YEA WE RIDE THE SHORT BUS
- Joined
- Nov 22, 2007
- Messages
- 6,417
Pretty easy. Just make sure the o-ring doesn't twist when you install them
Shainer
New member
- Joined
- Apr 28, 2012
- Messages
- 904
Do yourself a favor and order these. No sense paying what Cummins or Dodge asks for them.
[ame="http://www.amazon.com/gp/product/B005RUQRYQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00"]M2x10 Viton O-Ring, 75A Shore Durometer, Round, Black, 10 mm ID, 14 mm OD, 2 mm Width (Pack of 25): O Ring Seals: Amazon.com: Industrial & Scientific@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41nEvIpTTRL.@@AMEPARAM@@41nEvIpTTRL[/ame]
[ame="http://www.amazon.com/gp/product/B005RUQRYQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00"]M2x10 Viton O-Ring, 75A Shore Durometer, Round, Black, 10 mm ID, 14 mm OD, 2 mm Width (Pack of 25): O Ring Seals: Amazon.com: Industrial & Scientific@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41nEvIpTTRL.@@AMEPARAM@@41nEvIpTTRL[/ame]