lookin for nv4500

[black99]

im lookin for a nv4500 for my 99 dodge 4x4 wanting to change from automatic to nv4500 just gonna pick up parts as i can afford them, id prefer one with a bellhousing a stock tranny would do just fine, let me know what ya got THANKS

 

[Rollin Coal]

Heres the list for my 2wd

Transmission
Transmission mount

• I used a 2001 Chevy 2500 diesel mount and redrilled it

Driveshaft

• Stock driveshaft is too short, by about 8" and the yoke will not work. A 4wd yoke works.

Shift tower
Shift tower bolts
Shifter and boot
Pedals

• I have pedals out of a 1994 the pin for the clutch master piston rod needs to be cut off and welded on lower

Hydraulics

• 94-97 hydraulics work for any year, and are stronger, you can run a 3600lb pressure plate w/ the older hydraulics

Master cylinder mount

• This is needed to keep the master on the firewall, if you pull out the rubber plug and the 2 holes are open, you need this

Bellhousing
6 speed flywheel
Flywheel bolts

• cummins dealer, $3.50 each

Pilot bearing
Valair clutch
Pressure plate
Pressure plate bolts
Throwout bearing
Clutch fork
Starter spacer
Starter spacer bolts
5 qts amsoil
Tube of loc tite
Tube of RTV