Lots of 12V Motor Parts

kjd5033

kjd5033

Cummins Power
Joined
Jul 4, 2007
Messages
136
(2) 12v Bare Blocks, recomeded that both be boiled and honed
(2) Complete Sets of Good Rods and Caps
(2) Sets of Main Caps and Bolts
(2) Good Cam Shafts
(2) Good Cranks
(2) Oil Filter Setups
(2) 12v Heads would likely need valve jobs??
(1) set of rockers
(2) sets of valve springs (stock)
(2) oil pans
(2) oil pumps
(1) water pump
(1) Good Ve pump with gear and lines
(1) ve pump timing case and cover with bolts
(2) mechanical lift pumps
(2) tappet covers
(2) sets of push rods

taking all reasonable offers, can pm or call at 814-573 6982 if pics are needed let me know, parts are all located in northwest pa, i have no problem shipping any of the parts at the expense of the buyer. thanks
 
i would be interested in trades on big 12v injectors, ht3b, twin parts, stock exhaust manifold, etc
 
i also have an hx35 that needs rebuilt and (2) sump tubes for the oil pan
 
i also have a 47re that was removed due to a bad torque converter then did a nv4500 swap.........taking offers
 
ok guys i want this stuff gone, there is at least one of eveything left, so pm what you will pay for what you are interested in, no reasonable offers refused...........i also have a tst with r49 for 03-05
 
make sure you keep the p-pump gear with the p-pump, and the ve-pump gear with the ve-pump. i have heard they are different, better safe than sorry.
 
You must log in or register to reply here.
Back
Top