lots of turbo parts S400 HX82 exhaust housings wheels

GOT-Torque

GOT-Torque

is
Joined
Jul 2, 2007
Messages
5,284
turbo parts
BNIB HX82 center section $300
S470 wheel new 168299 on wheel $25
S465 compressor wheels new 168407 on wheel $25 ea
T6 0.9 housing for small center section charger part number 176809 (works with a 83/74 exh wheel) $100
87.4x80.4 turbine wheel new 171783 $150
79.8x73.4 turbine wheel new $100
2 of the 171328 cast compressor wheel $50
171242 cast compressor wheel $50
T6 1.1 housing (part number 168319) for 83/74 wheel $50 (have a couple left)
T6 1.58 housing (part number 168300) $50
T6 1.1 Wastegated housing part number 172366 $150

lightweight rear suspension for 98-02 dodge pulling truck (includes the lightened leaf springs, lightweight spacer block, u bolts, base plate, and bump stops (picture shows half of the parts) $100

If anything seems out of line shoot me an offer. PM me here or text/call 402-801-2319

some of the pics are shown here: http://www.competitiondiesel.com/forums/showthread.php?t=176135
 
I'm not positive, I will have to try and measure it tonight.

00775361-E17B-479F-AC96-8B68FC6BFB46_zpslyu2z9nn.jpg


A761DD77-E864-4628-A47F-1D0AFDC3C2FF_zpsqqsaokxw.jpg
 
Last edited:
Part number on the new center section shown above is 171316, has bearings in it and comes with heat shield.
 
GOT-Torque said:
T6 0.9 housing for small center section charger part number 176809 (works with a 83/74 exh wheel) $100

T6 1.1 housing (part number 168319) for 83/74 wheel $50 (have a couple left)
Click to expand...

Both s400 frame correct? I'll take them, PM price shipped to 02035 please.
 
What's left and more info:

BNIB HX82 center section $300
S470 wheel new 168299 on wheel $25
S465 compressor wheels new 168407 on wheel $25 ea
T6 0.9 housing for small center section charger part number 176809 (works with a 83/74 exh wheel) $100

2 of the 171328 cast compressor wheel $50
171242 cast compressor wheel $50
T6 1.1 housing (part number 168319) for 83/74 wheel $50 (have a couple left)
T6 1.58 housing (part number 168300) $50

The following three components fit together.
T6 1.1 Wastegated housing part number 172366 $150
79.8x73.4 turbine wheel new $100
new center section part #171316 $150
I assembled them with a 63.5mm compressor wheel and nut to hold it together (no comp cover though). Would sell them all together complete for $250 shipped.

lightweight rear suspension for 98-02 dodge pulling truck (includes the lightened leaf springs, lightweight spacer block, u bolts, base plate, and bump stops (picture shows half of the parts) $100
 
Any chance you measured the T6 1.58 turbine housing? Interested if it will fit the 96 turbine
 
That gated 1.10 housing is interesting, do you know if it fits on a standard s400 small bearing center section? It might be for one of those s300 center sections that use v-bands, seen it on a cat before. Is it 80mm inducer or 83mm?
 
straight 6 roar said:
That gated 1.10 housing is interesting, do you know if it fits on a standard s400 small bearing center section? It might be for one of those s300 center sections that use v-bands, seen it on a cat before. Is it 80mm inducer or 83mm?
Click to expand...

He says above that a 79.8x73.4 turbine fits in it.
 
What's left:

BNIB HX82 center section $300
S470 wheel new 168299 on wheel $25
S465 compressor wheels new 168407 on wheel $25 ea
79.8x73.4 turbine wheel new $100
2 of the 171328 cast compressor wheel $50
171242 cast compressor wheel $50
T6 1.1 housing (part number 168319) for 83/74 wheel $50 (sold two but still have a couple left)
T6 1.58 housing (part number 168300) $50
T6 1.1 Wastegated housing part number (looks to fit the 79.8x73.4 turbine wheel) 172366 $150 (see pics below) Also, the ID of the housing where the heat shield slides in is 3.460". I don't have a 83/74 wheel to test fit to see if that is actually what it fits or not?
Also found a S400 mount for a 03-07 Dodge (like this: http://sourceautomotive.biz/s400enginetoturbomount.aspx )$75

lightweight rear suspension for 98-02 dodge pulling truck (includes the lightened leaf springs, lightweight spacer block, u bolts, base plate, and bump stops (picture shows half of the parts) $100

F61FA0A0-1787-42CF-B03E-FE078D987491_zpsjqsxmx3x.jpg


E885F18C-EB5B-4876-B2DD-AB7F43F11868_zpsxmvn90a2.jpg


4F25FFF0-B54B-4EE4-BA01-C3B779F7E03C_zpsiorgpcyy.jpg


2A50E3FF-8223-46B6-B7BE-EC5B5F666C8B_zpsyqt93qqq.jpg
 
Last edited:
Wouldn't happen to have a 75mm cash wheel would you. Or a 83/74 wheel
 
Updated prices:

BNIB HX82 center section $250
S470 wheel new 168299 on wheel $15
S465 compressor wheels new 168407 on wheel $15 ea
79.8x73.4 turbine wheel new $100
2 of the 171328 (~66.5mmx92mm) ETT cast compressor wheel $25
171242 (66mmx97mm) ETT cast compressor wheel $50
168407 (64mmx91mm) nonETT cast compressor wheel $15
T6 1.1 housing (part number 168319) for 83/74 wheel $50 (sold two but still have a couple left)
T6 1.58 housing (part number 168300) $50
T6 1.1 Wastegated housing part number 172366 $125
Also found a S400 mount for a 03-07 Dodge $75

lightweight rear suspension for 98-02 dodge pulling truck (includes the lightened leaf springs, lightweight spacer block, u bolts, base plate, and bump stops (picture shows half of the parts) $100
 
Updated prices:

BNIB HX82 center section $200
S470 wheel new 168299 on wheel $10
S465 compressor wheels new 168407 on wheel $10 ea
79.8x73.4 turbine wheel new $75
2 of the 171328 (~66.5mmx92mm) ETT cast compressor wheel $20
171242 (66mmx97mm) ETT cast compressor wheel $40
168407 (64mmx91mm) nonETT cast compressor wheel $15
T6 1.1 housing (part number 168319) for 83/74 wheel $40 (sold two but still have a couple left)
T6 1.58 housing (part number 168300) $40
T6 1.1 Wastegated housing part number 172366 $100
Also found a S400 mount for a 03-07 Dodge $60

lightweight rear suspension for 98-02 dodge pulling truck (includes the lightened leaf springs, lightweight spacer block, u bolts, base plate, and bump stops (picture shows half of the parts) $75
 
What does the s400 mount bolt to? Trying to figure if it can be made to work on a VP truck
 
Chrisd91 said:
What does the s400 mount bolt to? Trying to figure if it can be made to work on a VP truck
Click to expand...

It bolts to the block. Not sure if all 5.9's have the holes or not. Puts the turbo right above the stock oil drain. If you google it or go on source automotive's website you can see where it mounts the primary on their 3rd gen compound kits.
 
You must log in or register to reply here.
Top