LSM Billet Roller Cam, Roller Lifters, and Roller Pushrods - 12V

[jpowel29]

For sale used - everything is in good condition
EEP/LSM 12V billet roller cam -
Intake Lobe lift .320"
Intake Duration @ .050" 216
Exhaust Lobe lift .320"
Exhaust Duration @ .050" 223
LSA 106
Install at 96-99 ICL
Needs .150" valve reliefs for a 12V
I have valve timing numbers available
$550 shipped

EEP Link Bar Roller lifters
$375 shipped

Haisley 7/16" heavy wall, roller pushrods
$275 shipped

Trades - I am looking for a complete 48re 4x4 trans (need a good core but would consider trading on a built trans)

 

[fullrut1514]

Trade all for a colt stage six cam and lifters?

 

[jpowel29]

PM sent

 

[jpowel29]

Cam, lifters, and pushrods all recently received a full cryo treatment and stress relief cycle at CryoPro

 

[97rada]

What work needs done to run those lifters?


Sent from my iPhone using Tapatalk

 

[ridejad]

What machine work is needed, definitely very interested

 

[jpowel29]

The block will need the lifter bore diameters opened up to accept the roller lifter. These are a link bar design so they are intended for a 12v block. Common rail blocks will need a different lifter design and guide bushing. To run a billet cam the block should have cam bushings installed.

 

[ridejad]

What's the best price you could do on cam, push rods, and lifters?

 

[jpowel29]

Roller Lifter body diameter is .850"

 

[jpowel29]

bump

 

[jpowel29]

bump

 

[jpowel29]

bump - also looking for a steel billet flat tappet set-up as trade options

 

[jpowel29]

bump

 

[Pocketchange97]

Does that cam require bigger cam bearings

 

[jpowel29]

Bigger cam bearings are not required but the block should be prepped for cam bearings on all journals

 

[Bodacious]

Hey John,

Checks in the mail for everything.

Thanks,

Arch

 

[jpowel29]

Sale pending

 

[jpowel29]

sold!