jktcummins
24v GOD!!!! HAHAHA
- Joined
- Apr 1, 2007
- Messages
- 2,450
Ok here a while back 8months or so my truck wasnt running right and just wouldnt get hot egt wise and just seemed like something was wrong. I replaced the map sensor and gained 100hp. However i replaced the old 3 prong sensor with the recall sensor which only has 2 prongs. It cam with a adapter harness to fit the engine harness.
Well now i decided to try to put a different harness on the engine to see if that might cure my cutting fuel problem. Well the only harness i could find was a 01 auto. Now i have a 2 prong plug on the harness side and the sensor side.
My question is i was sitting here looking at the wiring diagram for a 01 and a 02. Why does the 01 have 2 wires for the MAP and the 02 has 3 plugs???
Well now i decided to try to put a different harness on the engine to see if that might cure my cutting fuel problem. Well the only harness i could find was a 01 auto. Now i have a 2 prong plug on the harness side and the sensor side.
My question is i was sitting here looking at the wiring diagram for a 01 and a 02. Why does the 01 have 2 wires for the MAP and the 02 has 3 plugs???